Ancillaries: View ancillaries for all products | Plastex

Ancillaries


Browse the available ancillaries for our range of products

C

arrow_left [#335] Created with Sketch.
Crossgrip 20/20

PVC edging (H: 9/16, W: 2 1/2")

PVC edging (H: 9/16, W: 2 1/2")


Supplied in rolls of 33’ (10.1m) length. One tube of cold welding paste recommended for every 33' of edging. Comes in black, dark gray and yellow. Size: 9/16" x 3 3/4" x 33' (14mm x 100mm x 10.1m).

Connector clips: dual purpose (H: 9/16")

Connector clips: dual purpose (H: 9/16")


For joining sections of matting together side-to-side or end-to-end. Supplied in packs of 10

PVC snap track (H: 9/16")

PVC snap track (H: 9/16")


Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas. Comes in black and dark gray. Size: 9/16" x 8'2" (14mm x 2.5m)

Crossgrip PVC

PVC edging (H: 9/16, W: 2 1/2")

PVC edging (H: 9/16, W: 2 1/2")


Supplied in rolls of 33’ (10.1m) length. One tube of cold welding paste recommended for every 33' of edging. Comes in black, dark gray and yellow. Size: 9/16" x 3 3/4" x 33' (14mm x 100mm x 10.1m).

PVC edging (H: 9/16, W: 3 3/4")

PVC edging (H: 9/16, W: 3 3/4")


Supplied in rolls of 33’ (10.1m) length. One tube of cold welding paste recommended for every 33' of edging. Comes in black, dark gray and yellow. Size: 9/16" x 3 3/4" x 33' (14mm x 100mm x 10.1m).

Aluminum edging (H: 9/16")

Aluminum edging (H: 9/16")


Supplied in sections of 6'6" (2m) length with fixing screws and plugs. Comes in anodized aluminum and powder coated yellow. Size: 5/8" x 1 13 /16" x 6'6" (14mm x 45mm x 2m)

Connector clips: dual purpose (H: 9/16")

Connector clips: dual purpose (H: 9/16")


For joining sections of matting together side-to-side or end-to-end. Supplied in packs of 10

Connector clips: side-to-end (H: 9/16")

Connector clips: side-to-end (H: 9/16")


For joining sections of matting together side-to-end. Supplied in packs of 10

PVC snap track (H: 9/16")

PVC snap track (H: 9/16")


Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas. Comes in black and dark gray. Size: 9/16" x 8'2" (14mm x 2.5m)

Small floor hook (H: 9/16")

Small floor hook (H: 9/16")


For securing sections of the matting to the floor. Supplied in packs of 20 with screws and plugs

Crossline Covid-19

PVC edging (H: 3/8", W: 2")

PVC edging (H: 3/8”, W: 2”)


Supplied in rolls of 33’ (10.1m) length. One tube of cold welding paste recommended for every 33' of edging. Comes in black and dark gray. Size: 3/8” x 2” x 33’ (10mm x 50mm x 10.1m)

PVC snap track (H: 3/8")

PVC snap track (H: 13/32”)


Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas.

We recommend one tube of cold welding paste for every 33’ of edging. Comes in dark gray and black. Size: 13/32” x 8’2” (10.5mm x 2.5m)

Connector clips: dual purpose (H: 9/16")

Connector clips: dual purpose (H: 9/16”)


For joining sections of matting together side-to-side or end-to-end. Supplied in packs of 10

F

arrow_left [#335] Created with Sketch.
Firmagrip

PVC edging (H: 9/16, W: 2 1/2")

PVC edging (H: 9/16, W: 2 1/2")


Supplied in rolls of 33’ (10.1m) length. One tube of cold welding paste recommended for every 33' of edging. Comes in black, dark gray, dark brown, holly green, Oxford blue, yellow. Size: 9/16" x 2 1/2" x 33' (14mm x 60mm x 10.1m)

PVC edging (H: 9/16, W: 3 3/4")

PVC edging (H: 9/16, W: 3 3/4")


Supplied in rolls of 33’ (10.1m) length. One tube of cold welding paste recommended for every 33' of edging. Comes in black, dark gray and yellow. Size: 9/16" x 3 3/4" x 33' (14mm x 100mm x 10.1m)

Aluminum edging (H: 9/16")

Aluminum edging (H: 9/16")


Supplied in sections of 6'6" (2m) length with fixing screws and plugs. Comes in anodized aluminum and powder coated yellow. Size: 5/8" x 1 13 /16" x 6'6" (14mm x 45mm x 2m)

PVC snap track (H: 9/16")

PVC snap track (H: 9/16")


Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas. We recommend one tube of cold welding paste for every 33’ of edging. Comes in dark gray. Size: 9/16" x 8'2" (14mm x 2.5m)

Connector clips: side-to-side (H: 9/16")

Connector clips: side-to-side (H: 9/16")


For joining sections of matting together side-to-side. Supplied in packs of 10

Flexigrid

Aluminium edging (H: 7/8")

Aluminium edging (H: 7/8")


Supplied in sections of 6'6" (2m) length with fixing screws and plugs. Comes in anodised aluminium. Size: 7/8” x 2 3/16” x 6’6” (22mm x 50mm x 2m)

Ancillaries Connector Clips Dual Purpose (H: 1")

Connector clips: dual purpose (H: 1")


For joining sections of matting together side-to-side or end-to-end. Supplied in packs of 10

Frontrunner Brush

For surface-mounted installations

PVC edging (H: 9/16, W: 2 1/2")

PVC edging (H: 9/16, W: 2 1/2")


Supplied in rolls of 33’ (10.1m) length. One tube of cold welding paste recommended for every 33' of edging. Comes in black, dark gray, dark brown, holly green, Oxford blue, yellow. Size: 9/16" x 2 1/2" x 33' (14mm x 60mm x 10.1m)

PVC edging (H: 9/16, W: 3 3/4")

PVC edging (H: 9/16, W: 3 3/4")


Supplied in rolls of 33’ (10.1m) length. One tube of cold welding paste recommended for every 33' of edging. Comes in black, dark gray and yellow. Size: 9/16" x 3 3/4" x 33' (14mm x 100mm x 10.1m)

Aluminum edging (H: 9/16")

Aluminum edging (H: 9/16")


Supplied in sections of 6'6" (2m) length with fixing screws and plugs. Comes in anodized aluminum and powder coated yellow. Size: 9/16" x 1 13 /16" x 6'6" (14mm x 45mm x 2m)

PVC snap track (H: 9/16")

PVC snap track (H: 9/16")


Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas. We recommend one tube of cold welding paste for every 33’ of edging. Comes in dark gray. Size: 9/16" x 8'2" (14mm x 2.5m)

For recessed installations

R frame (H: 3/8")

R frame (H: 9/16")


You'll need these to secure the matting on the left-to-right edges. Supplied in sections of 10' (3m) length with fixing screws and plugs. Comes in anodized aluminum, powder coated dark gray and black. Size: 9/16" x 15/32" (14mm x 12mm)

H section (H: 3/8")

H section (H: 9/16")


If the front-to-back dimension of the mat well is greater than the final width of your matting, you may need a H section to secure the different sections together. Supplied in sections of 10' (3m) length. Comes in black, with mat insert color specified. Size: 9/16" x 1/2" (14mm x 13mm).

J frame (H: 11/16")

J frame (H: 11/16")


Installing Frontrunner against a wall? You'll need a J frame to secure the matting on the left-to-right edges. Supplied in sections of 10' (3m) length. Comes in dark gray and black. Size: 11/16" x 2 3/8" (18mm x 60mm)

T frame (H: 9/16")

T frame (H: 9/16")


You can use a T frame (1") to divide the matting into sections left-to-right – this makes it easier to lift and clean. Supplied in sections of 10' (3m) length. Comes in anodized aluminum, powder coated dark gray and black

TL frame (H: 9/16")

TL frame (H: 9/16")


You can use a T/L frame (2") to divide the matting into sections left-to-right – this makes it easier to lift and clean. Supplied in sections of 10' (3m) length. Comes in anodized aluminium

L frame (H: 6/10")

L frame (H: 5/8")


Installing around a circular door or non rectangular space? You'll need a L frame to secure the matting. Size: 6/10" x 8' (15mm x 2.7m length)

U section (H: 9/16")

U section (H: 9/16")


If the front-to-back dimension of the mat well is greater than the final width of your matting, you may need a U section to secure the different sections together. Supplied in sections of 10' (3m) length, with pre-drilled holes. Comes in anodized aluminum, powder coated dark gray and black. Size: 9/16" x 3/4" (14mm x 19mm)

Frontrunner Brush Wide

For surface-mounted installations

PVC edging (H: 9/16, W: 2 1/2")

PVC edging (H: 9/16, W: 2 1/2")


Supplied in rolls of 33’ (10.1m) length. One tube of cold welding paste recommended for every 33' of edging. Comes in black, dark gray, dark brown, holly green, Oxford blue, yellow. Size: 9/16" x 2 1/2" x 33' (14mm x 60mm x 10.1m)

PVC edging (H: 9/16, W: 3 3/4")

PVC edging (H: 9/16, W: 3 3/4")


Supplied in rolls of 33’ (10.1m) length. One tube of cold welding paste recommended for every 33' of edging. Comes in black, dark gray and yellow. Size: 9/16" x 3 3/4" x 33' (14mm x 100mm x 10.1m)

Aluminum edging (H: 9/16")

Aluminum edging (H: 9/16")


Supplied in sections of 6'6" (2m) length with fixing screws and plugs. Comes in anodized aluminum and powder coated yellow. Size: 9/16" x 1 13 /16" x 6'6" (14mm x 45mm x 2m)

PVC snap track (H: 9/16")

PVC snap track (H: 9/16")


Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas. We recommend one tube of cold welding paste for every 33’ of edging. Comes in dark gray. Size: 9/16" x 8'2" (14mm x 2.5m)

For recessed installations

H section (H: 3/8")

H section (H: 9/16")


If the front-to-back dimension of the mat well is greater than the final width of your matting, you may need a H section to secure the different sections together. Supplied in sections of 10' (3m) length, with fixing screws and plugs. Comes in black, with mat insert colour specified. Size: 9/16" x 1/2" (14mm x 13mm).

R frame (H: 3/8")

R frame (H: 9/16")


You'll need these to secure the matting on the left-to-right edges. Supplied in sections of 10' (3m) length with fixing screws and plugs. Comes in anodized aluminum, powder coated dark gray and black. Size: 9/16" x 15/32" (14mm x 12mm)

J frame (H: 11/16")

J frame (H: 11/16")


Installing Frontrunner against a wall? You'll need a J frame to secure the matting on the left-to-right edges. Supplied in sections of 10' (3m) length. Comes in dark gray and black. Size: 11/16" x 2 3/8" (18mm x 60mm)

T frame (H: 9/16")

T frame (H: 9/16")


You can use a T frame (1") to divide the matting into sections left-to-right – this makes it easier to lift and clean. Supplied in sections of 10' (3m) length. Comes in anodized aluminum, powder coated dark gray and black

TL frame (H: 9/16")

TL frame (H: 9/16")


You can use a T/L frame (2") to divide the matting into sections left-to-right – this makes it easier to lift and clean. Supplied in sections of 10' (3m) length. Comes in anodized aluminium

L frame (H: 6/10")

L frame (H: 5/8")


Installing around a circular door or non rectangular space? You'll need a L frame to secure the matting. Size: 5/8" x 8' (15mm x 2.7m length)

U section (H: 9/16")

U section (H: 9/16")


If the front-to-back dimension of the mat well is greater than the final width of your matting, you may need a U section to secure the different sections together. Supplied in sections of 10' (3m) length, with pre-drilled holes. Comes in anodized aluminum, powder coated dark gray and black. Size: 9/16" x 3/4" (14mm x 19mm)

Frontrunner Entry

For surface-mounted installations: Frontrunner Entry

PVC edging (H: 9/16, W: 2 1/2")

PVC edging (H: 9/16, W: 2 1/2")


Supplied in rolls of 33’ (10.1m) length. One tube of cold welding paste recommended for every 33' of edging. Comes in black, dark gray, dark brown, holly green, Oxford blue, yellow. Size: 9/16" x 2 1/2" x 33' (14mm x 60mm x 10.1m)

PVC edging (H: 9/16, W: 3 3/4")

PVC edging (H: 9/16, W: 3 3/4")


Supplied in rolls of 33' (10.1m) length with cold welding paste. Comes in black, dark gray and yellow. Size: 9/16" x 3 3/4" x 33' (14mm x 100mm x 10.1m)

Aluminum edging (H: 9/16")

Aluminum edging (H: 9/16")


Supplied in sections of 6'6" (2m) length with fixing screws and plugs. Comes in anodized aluminum and powder coated yellow. Size: 5/8" x 1 13 /16" x 6'6" (14mm x 45mm x 2m)

Connector clips: side-to-side (H: 9/16")

Connector clips: side-to-side (H: 9/16")


For joining sections of matting together side-to-side. Supplied in packs of 10

PVC snap track (H: 9/16")

PVC snap track (H: 9/16")


Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas. We recommend one tube of cold welding paste for every 33’ of edging. Comes in dark gray. Size: 9/16" x 8'2" (14mm x 2.5m)

For recessed installations: Frontrunner Entry

J frame (H: 9/16")

J Frame (H: 9/16")


Installing Frontrunner against a wall? You'll need a J frame to secure the matting on the left-to-right edges. Supplied in sections of 10' (3m) length. Comes in anodized aluminum. Size: 9/16" x 10' (14mm x 3m)

J frame (H: 11/16")

J frame (H: 11/16")


Installing Frontrunner against a wall? You'll need a J frame to secure the matting on the left-to-right edges. Supplied in sections of 10' (3m) length. Comes in dark gray and black. Size: 11/16" x 2 3/8" (18mm x 60mm)

T frame (H: 9/16")

T frame (H: 9/16")


You can use a T frame (1") to divide the matting into sections left-to-right – this makes it easier to lift and clean. Supplied in sections of 10' (3m) length. Comes in anodized aluminum, powder coated dark gray and black

TL frame (H: 9/16")

TL frame (H: 9/16")


You can use a T/L frame (2") to divide the matting into sections left-to-right – this makes it easier to lift and clean. Supplied in sections of 10' (3m) length. Comes in anodized aluminium

U section (H: 9/16")

U section (H: 9/16")


If the front-to-back dimension of the mat well is greater than the final width of your matting, you may need a U section to secure the different sections together. Supplied in sections of 10' (3m) length, with pre-drilled holes. Comes in anodized aluminum, powder coated dark gray and black. Size: 9/16" x 3/4" (14mm x 19mm)

L frame (H: 6/10")

L frame (H: 6/10")


Installing around a circular door or non rectangular space? You'll need a L frame to secure the matting. Size: 6/10" x 8' (15mm x 2.7m length)

R frame (H: 9/16")

R frame (H: 9/16")


You'll need these to secure the matting on the left-to-right edges. Supplied in sections of 10' (3m) length. Comes in anodized aluminum, powder coated dark gray and black. Size: 9/16" x 15/32" (14mm x 12mm)

For surface-mounted installations: Frontrunner Entry Low Profile

PVC edging (H: 3/8", W: 2")

PVC edging (H: 3/8", W: 2")


Supplied in rolls of 33’ (10.1m) length. One tube of cold welding paste recommended for every 33' of edging. Comes in black and dark gray. Size: 3/8" x 2" x 33' (10mm x 50mm x 10.1m)

Connector clips: side-to-side (H: 3/8")

Connector clips: side-to-side (H: 3/8")


For joining sections of low profile matting together side-to-side. Supplied in packs of 10

PVC snap track (H: 3/8")

PVC snap track (H: 3/8")


Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas. We recommend one tube of cold welding paste for every 33’ of edging. Comes in dark gray and black. Size: 13/32" x 8'2" (10.5mm x 2.5m)

For recessed installations: Frontrunner Entry Low Profile

H section (H: 3/8")

H section (H: 3/8")


If the front-to-back dimension of the mat well is greater than the final width of your matting, you may need a H section to secure the different sections together. Supplied in sections of 12' (3.6m) length. Comes in black, with mat insert color specified. Size: 3/8" x 1/2" (10mm x 13mm).

J frame (H: 3/8")

J Frame (H: 3/8")


Installing Frontrunner against a wall? You'll need an edge J to secure the matting on the left-to-right edges. Supplied in sections of 10' (3m) length with no pre-drilled holes. Comes in anodized aluminum, sold in quantities of 100. Size: 3/8" x 10' (10mm x 3m)

R frame (H: 3/8")

R frame (H: 3/8")


You'll need these to secure the matting on the left-to-right edges. Supplied in sections of 10' (3m) length. Comes in anodized aluminum, powder coated dark gray and black, sold in quantities of 100. Size: 3/8" x 15/32" (10mm x 12mm)

T frame inverted (H: 3/8")

T Frame inverted (H: 3/8")


You can use a T frame to divide the matting into sections left-to-right – this makes it easier to lift and clean. Supplied in sections of 10' (3m) length with no pre-drilled holes. Comes in anodized aluminum.

U section (H: 3/8")

U section (H: 3/8")


If the front-to-back dimension of the mat well is greater than the final width of your matting, you may need a U section to secure the different sections together. Supplied in sections of 10" (3m) length with pre-drilled holes. Comes in anodized aluminum, powder coated dark gray and black. Size: 3/8" x 11/16" (10mm x 18mm)

Z Frame (H: 3/8")

Z frame (H: 3/8")


Installing matting next to ceramic tiles? You'll need a Z frame to secure the matting. Supplied in sections of 12' (3.6m) length with no pre-drilled holes. Comes in anodized aluminum. Size: 3/8" x 15/16" (10mm x 24mm)

Frontrunner Plus

For surface-mounted installations: Frontrunner Plus

PVC edging (H: 9/16, W: 2 1/2")

PVC edging (H: 9/16, W: 2 1/2")


Supplied in rolls of 33’ (10.1m) length. One tube of cold welding paste recommended for every 33' of edging. Comes in black, dark gray, dark brown, holly green, Oxford blue, yellow. Size: 9/16" x 2 1/2" x 33' (14mm x 60mm x 10.1m)

PVC edging (H: 9/16, W: 3 3/4")

PVC edging (H: 9/16, W: 3 3/4")


Supplied in rolls of 33’ (10.1m) length. One tube of cold welding paste recommended for every 33' of edging. Comes in black, dark gray and yellow. Size: 9/16" x 3 3/4" x 33' (14mm x 100mm x 10.1m)

Aluminum edging (H: 9/16")

Aluminum edging (H: 9/16")


Supplied in sections of 6'6" (2m) length with fixing screws and plugs. Comes in anodized aluminum and powder coated yellow. Size: 9/16" x 1 13 /16" x 6'6" (15mm x 45mm x 2m)

Connector clips: side-to-side (H: 9/16")

Connector clips: side-to-side (H: 9/16")


For joining sections of matting together side-to-side. Supplied in packs of 10

PVC snap track (H: 9/16")

PVC snap track (H: 9/16")


Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas. We recommend one tube of cold welding paste for every 33’ of edging. Comes in dark gray. Size: 9/16" x 8'2" (14mm x 2.5m)

For recessed installations: Frontrunner Plus

J frame (H: 9/16")

J Frame (H: 9/16")


Installing Frontrunner against a wall? You'll need a J frame to secure the matting on the left-to-right edges. Supplied in sections of 10' (3m) length. Comes in anodized aluminum. Size: 9/16" x 10' (14mm x 3m)

J frame (H: 11/16")

J frame (H: 11/16")


Installing Frontrunner against a wall? You'll need a J frame to secure the matting on the left-to-right edges. Supplied in sections of 10' (3m) length with fixing screws and plugs. Comes in dark gray and black. Size: 11/16" x 2 3/8" (18mm x 60mm)

T frame inverted (H: 3/8")

T Frame inverted (H: 3/8")


You can use a T frame to divide the matting into sections left-to-right – this makes it easier to lift and clean. Supplied in sections of 10' (3m) length with fixing screws and plugs. Comes in anodized aluminum.

T frame (H: 9/16")

T frame (H: 9/16")


You can use a T frame (1") to divide the matting into sections left-to-right – this makes it easier to lift and clean. Supplied in sections of 10' (3m) length. Comes in anodized aluminum, powder coated dark gray and black

TL frame (H: 9/16")

TL frame (H: 9/16")


You can use a T/L frame (2") to divide the matting into sections left-to-right – this makes it easier to lift and clean. Supplied in sections of 10' (3m) length. Comes in anodized aluminium

L frame (H: 6/10")

L frame (H: 5/8")


Installing around a circular door or non rectangular space? You'll need a L frame to secure the matting. Size: 5/8" x 8' (15mm x 2.7m length)

U section (H: 9/16")

U section (H: 9/16")


If the front-to-back dimension of the mat well is greater than the final width of your matting, you may need a U section to secure the different sections together. Supplied in sections of 10' (3m) length. Comes in anodized aluminum, powder coated dark gray and black. Size: 9/16" x 3/4" (14mm x 19mm)

R frame (H: 9/16")

R frame (H: 9/16")


You'll need these to secure the matting on the left-to-right edges. Supplied in sections of 10' (3m) length. Comes in anodized aluminum, powder coated dark gray and black. Size: 9/16" x 15/32" (14mm x 12mm)

H section (H: 3/8")

H section (H: 9/16")


If the front-to-back dimension of the mat well is greater than the final width of your matting, you may need a H section to secure the different sections together. Supplied in sections of 12' (3m) length. Comes in black, with mat insert color specified. Size: 9/16" x 1/2" (14mm x 13mm).

For surface-mounted installations: Frontrunner Plus Low Profile

PVC edging (H: 3/8", W: 2")

PVC edging (H: 3/8", W: 2")


Supplied in rolls of 33’ (10.1m) length. One tube of cold welding paste recommended for every 33' of edging. Comes in black and dark gray. Size: 3/8" x 2" x 33' (10mm x 50mm x 10.1m)

Connector clips: side-to-side (H: 3/8")

Connector clips: side-to-side (H: 3/8")


For joining sections of low profile matting together side-to-side. Supplied in packs of 10

PVC snap track (H: 3/8")

PVC snap track (H: 3/8")


Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas. We recommend one tube of cold welding paste for every 33’ of edging. Comes in dark gray and black. Size: 13/32" x 8'2" (10.5mm x 2.5m)

For recessed installations: Frontrunner Plus Low Profile

J frame (H: 3/8")

J Frame (H: 3/8")


Installing Frontrunner against a wall? You'll need an edge J to secure the matting on the left-to-right edges. Supplied in sections of 10' (3m) length, no pre-drilled holes. Comes in anodized aluminum, sold in quantities of 100. Size: 3/8" x 10' (10mm x 3m)

U section (H: 3/8")

U section (H: 3/8")


If the front-to-back dimension of the mat well is greater than the final width of your matting, you may need a U section to secure the different sections together. Supplied in sections of 10' (3m) length, with pre-drilled holes. Comes in aluminum. Size: 3/8" x 10’ (10mm x 3m)

R frame (H: 3/8")

R frame (H: 3/8")


You'll need these to secure the matting on the left-to-right edges. Supplied in sections of 10' (3m) length with fixing screws and plugs. Comes in anodized aluminum, powder coated dark gray and black. Size: 3/8" x 15/32" (10mm x 12mm)

Z Frame (H: 3/8")

Z frame (H: 3/8")


Installing matting next to ceramic tiles? You'll need a Z frame to secure the matting. Supplied in sections of 12' (3.6m) length with no pre-drilled holes. Comes in anodized aluminum. Size: 3/8" x 15/16" (10mm x 24mm)

H section (H: 3/8")

H section (H: 3/8")


If the front-to-back dimension of the mat well is greater than the final width of your matting, you may need a H section to secure the different sections together. Supplied in sections of 12' (3.6m) length, with fixing screws and plugs. Comes in black, with mat insert colour specified. Size: 3/8" x 1/2" (10mm x 13mm)

Frontrunner SB

PVC edging (SB / SB+)

PVC edging (SB / SB+)


Supplied in rolls of 33’ (10.1m) length. One tube of cold welding paste recommended for every 33' of edging. Comes in black and dark gray. Size: 1/4" x 1" x 197' (6.5mm x 30mm x 60m)

PVC joining strip (SB / SB+)

PVC joining strip (SB / SB+)


Can be welded to join rolls end-to-end or side-to-side when doing large installations. Comes in black. Size: 1/8" x 11'9" (3.5mm x 3.6m)

Frontrunner SB+

PVC edging (SB / SB+)

PVC edging (SB / SB+)


Supplied in rolls of 197" (60m) length. One tube of cold welding paste recommended for every 33' of edging. Comes in black and dark gray. Size: 1/4" x 1" x 197' (6.5mm x 30mm x 60m)

PVC joining strip (SB / SB+)

PVC joining strip (SB / SB+)


Can be welded to join rolls end-to-end or side-to-side when doing large installations. Comes in black. Size: 1/8" x 11'9" (3.5mm x 3.6m)

Frontrunner XT

For surface-mounted installations: Frontrunner XT

PVC edging (H: 9/16, W: 2 1/2")

PVC edging (H: 9/16, W: 2 1/2")


Supplied in rolls of 33’ (10.1m) length. One tube of cold welding paste recommended for every 33' of edging. Comes in black, dark gray, dark brown, holly green, Oxford blue, yellow. Size: 9/16" x 2 1/2" x 33' (14mm x 60mm x 10.1m)

Aluminum edging (H: 9/16")

Aluminum edging (H: 9/16")


Supplied in sections of 6'6" (2m) length with fixing screws and plugs. Comes in anodized aluminum and powder coated yellow. Size: 9/16" x 1 13 /16" x 6'6" (14mm x 45mm x 2m)

Connector clips: side-to-side (H: 9/16")

Connector clips: side-to-side (H: 9/16")


For joining sections of matting together side-to-side. Supplied in packs of 10

PVC snap track (H: 9/16")

PVC snap track (H: 9/16")


Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas. We recommend one tube of cold welding paste for every 33’ of edging. Comes in dark gray. Size: 9/16" x 8'2" (14mm x 2.5m)

For recessed installations: Frontrunner XT

J frame (H: 9/16")

J Frame (H: 9/16")


Installing Frontrunner against a wall? You'll need a J frame to secure the matting on the left-to-right edges. Supplied in sections of 10' (3m) length. Comes in anodized aluminum. Size: 9/16" x 10' (14mm x 3m)

J frame (H: 11/16")

J frame (H: 11/16")


Installing Frontrunner against a wall? You'll need a J frame to secure the matting on the left-to-right edges. Supplied in sections of 10' (3m) length with fixing screws and plugs. Comes in dark gray and black. Size: 11/16" x 2 3/8" (18mm x 60mm)

T frame (H: 9/16")

T frame (H: 9/16")


You can use a T frame (1") to divide the matting into sections left-to-right – this makes it easier to lift and clean. Supplied in sections of 10' (3m) length. Comes in anodized aluminum, powder coated dark gray and black

TL frame (H: 9/16")

TL frame (H: 9/16")


You can use a T/L frame (2") to divide the matting into sections left-to-right – this makes it easier to lift and clean. Supplied in sections of 10' (3m) length. Comes in anodized aluminium

L frame (H: 6/10")

L frame (H: 5/8")


Installing around a circular door or non rectangular space? You'll need a L frame to secure the matting. Size: 5/8" x 8' (15mm x 2.7m length)

U section (H: 9/16")

U section (H: 9/16")


If the front-to-back dimension of the mat well is greater than the final width of your matting, you may need a U section to secure the different sections together. Supplied in sections of 10' (3m) length, with no pre-drilled holes. Comes in anodized aluminum, powder coated dark gray and black. Size: 9/16" x 3/4" (14mm x 19mm)

R frame (H: 9/16")

R frame (H: 9/16")


You'll need these to secure the matting on the left-to-right edges. Supplied in sections of 10' (3m) length. Comes in anodized aluminum, powder coated dark gray and black. Size: 9/16" x 15/32" (14mm x 12mm)

H section (H: 3/8")

H section (H: 9/16")


If the front-to-back dimension of the mat well is greater than the final width of your matting, you may need a H section to secure the different sections together. Supplied in sections of 10' (3m) length. Comes in black, with mat insert color specified. Size: 9/16" x 1/2" (14mm x 13mm).

For surface-mounted installations: Frontrunner XT Low Profile

PVC edging (H: 3/8", W: 2")

PVC edging (H: 3/8", W: 2")


Supplied in rolls of 33’ (10.1m) length. One tube of cold welding paste recommended for every 33' of edging. Comes in black and dark gray. Size: 3/8" x 2" x 33' (10mm x 50mm x 10.1m)

Connector clips: side-to-side (H: 3/8")

Connector clips: side-to-side (H: 3/8")


For joining sections of low profile matting together side-to-side. Supplied in packs of 10

PVC snap track (H: 3/8")

PVC snap track (H: 3/8")


Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas. We recommend one tube of cold welding paste for every 33’ of edging. Comes in dark gray and black. Size: 13/32" x 8'2" (10.5mm x 2.5m)

For recessed installations: Frontrunner XT Low Profile

J frame (H: 3/8")

J Frame (H: 3/8")


Installing Frontrunner against a wall? You'll need an edge J to secure the matting on the left-to-right edges. Supplied in sections of 10' (3m) length, with no pre-drilled holes. Comes in anodized aluminum. Size: 3/8" x 10' (10mm x 3m). Sold in quantities of 100.

U section (H: 3/8")

U section (H: 3/8")


If the front-to-back dimension of the mat well is greater than the final width of your matting, you may need a U section to secure the different sections together. Supplied in sections of 10" (3m) length, with fixing screws and plugs. Comes in anodized aluminum, powder coated dark gray and black. Size: 3/8" x 11/16" (10mm x 18mm)

R frame (H: 3/8")

R frame (H: 3/8")


You'll need these to secure the matting on the left-to-right edges. Supplied in sections of 10' (3m) length. Comes in anodized aluminum, powder coated dark gray and black. Size: 3/8" x 15/32" (10mm x 12mm). Sold in quantities of 100.

T Frame inverted (H: 3/8")


You can use a T frame to divide the matting into sections left-to-right – this makes it easier to lift and clean. Supplied in sections of 10' (3m) length with no pre-drilled holes. Comes in anodized aluminum.

Z Frame (H: 3/8")

Z frame (H: 3/8")


Installing matting next to ceramic tiles? You'll need a Z frame to secure the matting. Supplied in sections of 11' (3.6m) length with no pre-drilled holes. Comes in anodized aluminum, powder coated dark gray and black. Size: 3/8" x 15/16" (10mm x 24mm)

H section (H: 3/8")

H section (H: 3/8")


If the front-to-back dimension of the mat well is greater than the final width of your matting, you may need a H section to secure the different sections together. Supplied in sections of 11' (3.6m) length, with fixing screws and plugs. Comes in black, with mat insert colour specified. Size: 3/8" x 1/2" (10mm x 13mm).

H

arrow_left [#335] Created with Sketch.
Heronair

PVC edging (H: 3/8", W: 2")

PVC edging (H: 3/8", W: 2")


Supplied in rolls of 33’ (10.1m) length. One tube of cold welding paste recommended for every 33' of edging. Comes in black and dark gray. Size: 3/8" x 2" x 33' (10mm x 50mm x 10.1m)

PVC snap track (H: 3/8")

PVC snap track (H: 3/8")


Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas. We recommend one tube of cold welding paste for every 33’ of edging. Comes in dark gray and black. Size: 13/32" x 8'2" (10.5mm x 2.5m)

Connector clips: dual purpose (H: 9/16")

Connector clips: dual purpose (H: 9/16")


For joining sections of matting together side-to-side or end-to-end. Supplied in packs of 10

Heronair Photoluminescent

PVC edging (H: 3/8", W: 2")

PVC edging (H: 3/8", W: 2")


Supplied in rolls of 10.1m (33’) length. One tube of cold welding paste recommended for every 10m of edging. Comes in black and dark gray. Size: 3/8" x 2" x 33' (10mm x 50mm x 10.1m)

PVC snap track (H: 3/8")

PVC snap track (H: 3/8")


Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas. We recommend one tube of cold welding paste for every 10m of edging. Comes in dark gray and black. Size: 13/32" x 8'2" (10.5mm x 2.5m)

Connector clips: dual purpose (H: 9/16")

Connector clips: dual purpose (H: 9/16")


For joining sections of matting together side-to-side or end-to-end. Supplied in packs of 10

Herongripa

PVC edging (H: 9/16, W: 2 1/2")

PVC edging (H: 9/16, W: 2 1/2")


Supplied in rolls of 33’ (10.1m) length. One tube of cold welding paste recommended for every 33' of edging. Comes in black, dark gray, dark brown, holly green, Oxford blue, yellow. Size: 9/16" x 2 1/2" x 33' (14mm x 60mm x 10.1m)

Aluminum edging (H: 9/16")

Aluminum edging (H: 9/16")


Supplied in sections of 6'6" (2m) length with fixing screws and plugs. Comes in anodized aluminum and powder coated yellow. Size: 5/8" x 1 13 /16" x 6'6" (14mm x 45mm x 2m)

Small floor hook (H: 9/16")

Small floor hook (H: 9/16")


For securing sections of matting to the floor. Supplied in packs of 20 with screws and plugs

PVC edging (H: 9/16, W: 3 3/4")

PVC EDGING (H: 9/16, W: 2 1/2")


Supplied in rolls of 33’ (10.1m) length. One tube of cold welding paste recommended for every 33' of edging. Comes in black, dark gray, dark brown, holly green, Oxford blue, yellow. Size: 9/16" x 2 1/2" x 33' (14mm x 60mm x 10.1m)

Connector clips: dual purpose (H: 9/16")

CONNECTOR CLIPS: DUAL PURPOSE (H: 9/16")


For joining sections of matting together side-to-side or end-to-end. Supplied in packs of 10

Heronrib

PVC edging (H: 3/8", W: 2")

PVC edging (H: 3/8", W: 2")


Supplied in rolls of 33’ (10.1m) length. One tube of cold welding paste recommended for every 33' of edging. Comes in black and dark gray. Size: 3/8" x 2" x 33' (10mm x 50mm x 10.1m)

Connector clips: dual purpose (H: 9/16")

Connector clips: dual purpose (H: 9/16")


For joining sections of matting together side-to-side or end-to-end. Supplied in packs of 10

PVC snap track (H: 3/8")

PVC snap track (H: 3/8")


Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas. We recommend one tube of cold welding paste for every 33’ of edging. Comes in dark gray and black. Size: 13/32" x 8'2" (10.5mm x 2.5m)

Small floor hook (H: 9/16")

Small floor hook (H: 9/16”)


For securing sections of the matting to the floor. Supplied in packs of 10 with screws and plugs

Herontile

EVA ramped edging

EVA ramped edging


Snap-on edging supplied in 13" (33cm) lengths. Comes in dark gray and ocean blue. Size: 5/8" x 2 3/4" x 13" (15mm x 7cm x 33cm)

HVD

PVC edging (H: 9/16, W: 2 1/2")

PVC edging (H: 9/16, W: 2 1/2")


Supplied in rolls of 33’ (10.1m) length. One tube of cold welding paste recommended for every 33' of edging. Comes in black, dark gray, dark brown, holly green, Oxford blue, yellow. Size: 9/16" x 2 1/2" x 33' (14mm x 60mm x 10.1m)

PVC edging (H: 9/16, W: 3 3/4")

PVC edging (H: 9/16, W: 3 3/4")


Supplied in rolls of 33’ (10.1m) length. One tube of cold welding paste recommended for every 33' of edging. Comes in black, dark gray and yellow. Size: 9/16" x 3 3/4" x 33' (14mm x 100mm x 10.1m)

Aluminum edging (H: 9/16")

Aluminum edging (H: 9/16")


Supplied in sections of 6'6" (2m) length with fixing screws and plugs. Comes in anodized aluminum and powder coated yellow. Size: 5/8" x 1 13 /16" x 6'6" (14mm x 45mm x 2m)

Connector clips: dual purpose (H: 9/16")

Connector clips: dual purpose (H: 9/16")


For joining sections of matting together side-to-side or end-to-end. Supplied in packs of 10

PVC snap track (H: 9/16")

PVC snap track (H: 9/16")


Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas. We recommend one tube of cold welding paste for every 33’ of edging. Comes in dark gray. Size: 9/16" x 8'2" (14mm x 2.5m)

Small floor hook (H: 9/16")

Small floor hook (H: 9/16")


For securing sections of matting to the floor. Supplied in packs of 20 with screws and plugs

Large floor hook (H: 9/16")

Large floor hook (H: 9/16")


For securing sections of matting to the floor. Supplied in packs of 10 with screws and plugs

P

arrow_left [#335] Created with Sketch.
PennyLok

Plastex TredLok edging male

PennyLok edging (male)


Supplied in 1'8" (50cm) lengths. Comes in black and yellow. Size: 1/2" x 2" x 1'8" (12mm x 50mm x 500mm)

Plastex TredLok edging female

PennyLok edging (female)


Supplied in 1'8" (50cm) lengths. Comes in black and yellow. Size: 1/2" x 2" x 1'8" (12mm x 50mm x 500mm)

PillogriD

Ancillaries Pillogrid Bespoke Size Panels

Bespoke panels


PillogriD is available in rolls for on site fabrication and installation. Alternatively, we can supply factory fabricated panels in one piece that allows for quick and easy unrolling and installation. Due to shipping and handling restrictions, the maximum dimension of these panels is 16'm (5m) on the shorter side.

Plastex Grid

Aluminum edging (H: 1")

Aluminum edging (H: 1")


Supplied in sections of 6'6" (2m) length with fixing screws and plugs. Comes in anodized aluminum. Size: 1" x 2 3/4" x 6'6" (25mm x 66mm x 2m)

Plastex Lok

Plastex Lok edging (male)

Plastex Lok edging (male)


Supplied in 1'8" (50cm) lengths. Both male and female strips are available. Comes in black and yellow. Size: 1/2" x 2" x 1'8"(12mm x 50mm x 500mm)

Plastex Lok edging (female)

Plastex Lok edging (female)


Supplied in 1'8" (50cm) lengths. Both male and female strips are available. Comes in black and yellow. Size: 1/2" x 2" x 1'8"(12mm x 50mm x 500mm)

Plastex Lok ramped corner

Plastex Lok ramped corner


Comes in black and yellow. Size: 1/2" x 2" x 2" (12mm x 50mm x 50mm)

Ancillaries Plastex Lok Connector Clips

Plastex Lok edging connector clips


For joining two ends of the edging together. One lug is supplied for every two pieces of edging in the relevant color

T

arrow_left [#335] Created with Sketch.
Trackgrip

PVC edging (H: 9/16, W: 2 1/2")

PVC edging (H: 9/16, W: 2 1/2")


Supplied in rolls of 33’ (10.1m) length. One tube of cold welding paste recommended for every 33' of edging. Comes in black, dark gray, dark brown, holly green, Oxford blue, yellow. Size: 9/16" x 2 1/2" x 33' (14mm x 60mm x 10.1m)

Aluminum edging (H: 9/16")

Aluminum edging (H: 9/16")


Supplied in sections of 6'6" (2m) length with fixing screws and plugs. Comes in anodized aluminum and powder coated yellow. Size: 5/8" x 1 13 /16" x 6'6" (14mm x 45mm x 2m)

Small floor hook (H: 9/16")

Small floor hook (H: 9/16")


For securing sections of matting to the floor. Supplied in packs of 20 with screws and plugs

PVC edging (H: 9/16, W: 3 3/4")

PVC EDGING (H: 9/16, W: 2 1/2")


Supplied in rolls of 33’ (10.1m) length. One tube of cold welding paste recommended for every 33' of edging. Comes in black, dark gray, dark brown, holly green, Oxford blue, yellow. Size: 9/16" x 2 1/2" x 33' (14mm x 60mm x 10.1m)

Connector clips: dual purpose (H: 9/16")

CONNECTOR CLIPS: DUAL PURPOSE (H: 9/16")


For joining sections of matting together side-to-side or end-to-end. Supplied in packs of 10

TredLok

Plastex TredLok edging male

TredLok edging (male)


Supplied in 1'8" (50cm) lengths. Comes in black and yellow. Size: 1/2" x 2" x 1'8" (12mm x 50mm x 500mm)

Plastex TredLok edging female

TredLok edging (female)


Supplied in 1'8" (50cm) lengths. Comes in black and yellow. Size: 1/2" x 2" x 1'8" (12mm x 50mm x 500mm)

Tuff Spun

PVC edging (H: 3/8", W: 2")

PVC edging (H: 3/8", W: 2")


Supplied in rolls of 33’ (10.1m) length. One tube of cold welding paste recommended for every 33' of edging. Comes in black and dark gray. Size: 3/8" x 2" x 33' (10mm x 50mm x 10.1m)

PVC snap track (H: 3/8")

PVC snap track (H: 3/8")


Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas. We recommend one tube of cold welding paste for every 33’ of edging. Comes in dark gray and black. Size: 13/32" x 8'2" (10.5mm x 2.5m)

Tuff Spun Deck

PVC edging (H: 9/16, W: 2 1/2")

PVC edging (H: 9/16, W: 2 1/2")


Supplied in rolls of 33’ (10.1m) length. One tube of cold welding paste recommended for every 33' of edging. Comes in black, dark gray, dark brown, holly green, Oxford blue, yellow. Size: 9/16" x 2 1/2" x 33' (14mm x 60mm x 10.1m)

PVC snap track (H: 9/16")

PVC snap track (H: 9/16")


Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas. We recommend one tube of cold welding paste for every 33’ of edging. Comes in dark gray. Size: 9/16" x 8'2" (14mm x 2.5m)

Tuff Spun Wear

PVC edging (H: 9/16, W: 2 1/2")

PVC edging (H: 9/16, W: 2 1/2")


Supplied in rolls of 33’ (10.1m) length. One tube of cold welding paste recommended for every 33' of edging. Comes in black, dark gray, dark brown, holly green, Oxford blue, yellow. Size: 9/16" x 2 1/2" x 33' (14mm x 60mm x 10.1m)

PVC snap track (H: 9/16")

PVC snap track (H: 9/16")


Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas. We recommend one tube of cold welding paste for every 33’ of edging. Comes in dark gray. Size: 9/16" x 8'2" (14mm x 2.5m)

V

arrow_left [#335] Created with Sketch.
Vynagrip

Vynagrip and Vynagrip Plus

PVC edging (H: 9/16, W: 2 1/2")

PVC edging (H: 9/16, W: 2 1/2")


Supplied in rolls of 33’ (10.1m) length. One tube of cold welding paste recommended for every 33' of edging. Comes in black, dark gray, dark brown, holly green, Oxford blue, yellow. Size: 9/16" x 2 1/2" x 33' (14mm x 60mm x 10.1m)

PVC edging (H: 9/16, W: 3 3/4")

PVC edging (H: 9/16, W: 3 3/4")


Supplied in rolls of 33’ (10.1m) length. One tube of cold welding paste recommended for every 33' of edging. Comes in black, dark gray and yellow. Size: 9/16" x 3 3/4" x 33' (14mm x 100mm x 10.1m)

Aluminum edging (H: 9/16")

Aluminum edging (H: 9/16")


Supplied in sections of 6'6" (2m) length with fixing screws and plugs. Comes in anodized aluminum and powder coated yellow. Size: 5/8" x 1 13 /16" x 6'6" (14mm x 45mm x 2m)

Small floor hook (H: 9/16")

Small floor hook (H: 9/16")


For securing sections of matting to the floor. Supplied in packs of 10 with screws and plugs

Large floor hook (H: 9/16")

Large floor hook (H: 9/16")


For securing sections of matting to the floor. Supplied in packs of 10 with screws and plugs

PVC snap track (H: 9/16")

PVC snap track (H: 9/16")


Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas.

We recommend one tube of cold welding paste for every 33’ of edging. Comes in dark gray. Size: 9/16" x 8'2" (14mm x 2.5m)

Connector clips: side-to-end (H: 9/16")

Connector clips: side-to-end (H: 9/16")


For joining sections of matting together side-to-end. Supplied in packs of 10

Connector clips: dual purpose (H: 9/16")

Connector clips: dual purpose (H: 9/16")


For joining sections of matting together side-to-side or end-to-end. Supplied in packs of 10

Z

arrow_left [#335] Created with Sketch.
Zed Land

PVC snap track (H: 3/8")

PVC snap track (H: 3/8")


Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas. We recommend one tube of cold welding paste for every 33’ of edging. Comes in dark gray and black. Size: 13/32" x 8'2" (10.5mm x 2.5m)

Esd

ESD screw fit earthing lead


Supplied in 14'9" (4.5m) lengths

PVC edging (H: 3/8", W: 2")

PVC edging (H: 3/8", W: 2")


Supplied in rolls of 33’ (10.1m) length. One tube of cold welding paste recommended for every 33' of edging. Comes in black and dark gray. Size: 3/8" x 2" x 33' (10mm x 50mm x 10.1m)

Subscribe to our

Newsletter

Sign up to our newsletter for updates, news and events

You’ve added ${cartTotal} sample