Frontrunner SB: Walk-off matting | Plastex

Frontrunner SB+


Solid-backed walk-off matting for interior and exterior areas without a mat well.

Download Data Sheet

No mat well? No problem: Frontrunner SB is a solid-back entrance mat designed to be loose laid over your existing floor coverings.

The ribbed entrance mat scrapes shoes and wheels clean, while the grid traps and collects debris. This helps to prevent dirt being tracked inside, which helps to reduce cleaning intervals and keeps interiors looking stylish for longer.

Slip resistant, wheel-proof and heel-proof, Frontrunner SB has excellent rolling resistance, making it the ideal walk-off matting for commercial buildings, grocery stores and shopping centers with high foot traffic.

Installation is simple. Adhere directly to the floor to create a surface-mounted walk-off mat, or place this loose lay matting directly over your existing floor to create a slip-resistant walkway – no mat well required.

Seamless integration

Comes in 33" (10m) rolls or order a custom size

Simple installation

Simply roll out and cut to fit on site; contours to uneven surfaces

Easy to maintain

This ribbed floor mat is light to handle; no special cleaning tools needed

Features + benefits

Features

Textured Surface

Etched pattern

One Layer Construction

One-layer, hollow construction

Ribbed Surface

Ribbed vinyl pattern with solid backing

Elevated Surface

1/4" (6.5mm) grid height

Close Mesh Grid

Close mesh grid

Benefits

Slip Resistant

Certified slip resistant (DIN 51130: R11, ASTM C1028: 0.6/0.6)

Lightweight

Lightweight

Easy Installation

Easy to install, no need for recessed mat well

Loose Lay

Loose lay or adhere to subfloor

Wheel And Heel Proof

Wheel and heel proof

Standard sizes
Frontrunner SB+
Height1/4"-5/16" (6.5/8mm)
Standard roll option33' x 3'3’ (10 x 1m)
Standard module option3'3" x 4'11" (1 x 1.5m)
Weight1.3lb/sq.ft (6.3 kg/m2)


Surface modules are supplied with factory fitted PVC ramped edging to four sides

Technical info
PVC BACKING:
AcousticExcellent sound absorption
ChemicalResistant to most acids, alkalines and oils. You can read more about specific chemical resistances by downloading this information sheet.
CompositionFlexible Polyvinyl Chloride (PVC)
EnvironmentOur Frontrunner system qualifies for LEED IEQ Credit 5, and when produced in black or gray, Frontrunner may also qualify for LEED MR Credit 4. We don’t use any substances included in the SVHC list under REACH in any of our matting products.
FireEN ISO 13501-1:2007-Cfl-S1, ASTM E648, Class 2
ReversionThermoplastic shrinkage can result in size reductions up to 2%. This may be accelerated in hot environments. You can read more about the causes of shrinkage by downloading this information sheet.
Rolling resistanceASTM F 2753: 0.080 loss of thickness after 1,000 cycles at 500lbs.
Slip resistance

ASTM E303 Dry/Wet with lines along–lines across 74-95 / 61-74
DIN 51130: R11, V10

ThermalDesigned to function at temperatures from -7°F and up to +140°F. Slight size variation may occur at temperature extremes.
UV lightResistant to PVC degradation
WarrantyThree years. Visit our policies page for more information about warranties.


ABSORBENT INSERTS (ZENO 600 SERIES):
Wear classificationEN 1307 - 33, Commercial heavy
Pile materialECONYL® , 100% regenerated polyamide BCF
Tuft base100% regenerated non woven polyester Colback™
Phthalate Free backingWaterproof Comfort™ vinyl
Total heightEN 1765 ± 11/32”
Pile heightEN 1766 ± 17/64”
Total weightEN 8543 ± 101.09 lb/ft2
Pile yarn weight± 19.46 lb/ft2
Pile density± 0.00459 lbs/in3
FireEN ISO 13501-1:2007 Cfl-S1
Suitable for castor chairsEN 985 A, intensive use r=2.8
Colours

10

Ancillaries
PVC edging (SB / SB+)

PVC edging (SB / SB+)


Supplied in rolls of 197" (60m) length. One tube of cold welding paste recommended for every 33' of edging. Comes in black and dark gray. Size: 1/4" x 1" x 197' (6.5mm x 30mm x 60m)

PVC joining strip (SB / SB+)

PVC joining strip (SB / SB+)


Can be welded to join rolls end-to-end or side-to-side when doing large installations. Comes in black. Size: 1/8" x 11'9" (3.5mm x 3.6m)

Installation

Frontrunner SB+'s one-piece construction means installation is simple

There are two ways to install SB: you can adhere directly to the floor, or loose lay modules with PVC edging. For large installations with medium to high traffic, we recommend adhering your mat using F Ball’s Styccobond F73 PLUS, which is a single-part, heavy-duty adhesive that provides high bond strength.

Watch the videos below for a step-by-step installation guide, or download the installation instructions here.


Cleaning
BIM objects

Download our BIM objects in both Revit and IFC file types

Seen something you like?


We’re always here to help. Fill out the below form and we’ll be in touch within 48 hours.

SIMILAR PRODUCTS YOU MAY LIKE


Also ideal for removing moisture in high traffic entranceways:

Subscribe to our

Newsletter

Sign up to our newsletter for updates, news and events

You’ve added ${cartTotal} sample