Frontrunner Entry
Open-grid, slip-resistant entrance matting designed for high traffic areas.
Stopping dirt at the door has never been so important. Frontrunner Entry helps to solve heightened hygiene concerns by preventing unwanted debris from being walked or wheeled inside businesses and workplaces.
The entrance matting’s aggressive tread pattern scrapes shoes and wheels clean, while the open grid traps and collects dirt and debris. This unique ‘scrape and clean’ system helps maintain interiors for longer, reducing cleaning costs. This makes Frontrunner Entry the ideal commercial entrance mat for any environment with high traffic entrances or walkways.
Whether you're after a surface-mounted or recessed entry mat, Frontrunner Entry is purpose designed to fit seamlessly with all well depths and contours effortlessly to the subfloor. If you’re looking for loose lay entrance matting to place directly over an existing surface, you can also order modules with ramped PVC edges.
Seamless integration
Choose from modules with ramped PVC edging, rolls in standard widths and 10m lengths, or order a custom size
Simple installation
One-piece construction means the entrance matting can be cut to size on site, with no previous site visits needed
Easy to maintain
Simply roll or lift to clean, no special tools needed
Features
Diamond cut pattern
Two layer, open-grid construction
Close mesh grid
Made from flexible PVC
Comes in 10m (33') rolls or modules
Benefits
Certified slip resistant (DIN 51130: R11, ASTM 1677: 0.6/0.6)
Excellent drainage (DIN 51130: V10)
Wheel and heel proof
Easy to cut on site, contours to uneven surfaces
Seamless installation
| Frontrunner Entry | Low Profile | |
| Height | 14mm (9/16") | 10.5mm (13/32") |
| Standard roll options | 10 x 0.6m (33' x 2’) | 10 x 0.6m (33' x 2') |
| 10 x 0.91m (33' x 3’) | 10 x 0.91m (33' x 3') | |
| 5 x 1.2m (16'6" x 4’) | 5 x 1.2m (16'6" x 4') | |
| Standard module options | 0.8 x 1.2m (2'7" x 4’) | |
| 1 x 1.5m (3'3" x 4’11") | ||
| 1.1 x 2m (3'7" x 6’7") | ||
| Weight | 10.5 kg/m2 (2 lbs/sq.ft) | 8.7 kg/m2 (1.6 lbs/sq.ft) |
Surface modules are supplied with factory fitted PVC ramped edging to four sides
| Acoustic | Excellent sound absorption. |
| Chemical | Resistant to most acids, alkalines and oils. You can read more about specific chemical resistances by downloading this information sheet. |
| Composition | Flexible Polyvinyl Chloride (PVC) |
| Environment | Frontrunner Entry is 100% recyclable. We don’t use any substances included in the SVHC list under REACH in any of our matting products. |
| Fire | EN ISO 13501-1:2007-Bfl-S1, ASTM E648, Class 1 |
| Reversion | Thermoplastic shrinkage can result in size reductions up to 2%. This may be accelerated in hot environments. You can read more about the causes of shrinkage by downloading this information sheet. |
| Slip resistance | DIN 51130: R11, V10 ASTM E303 Dry/Wet with lines along–lines across 77-97 / 58-71 |
| Thermal | Designed to function at temperatures from -23°C and up to +60°C. Slight size variation may occur at temperature extremes. |
| UV light | Resistant to PVC degradation. |
| Warranty | Four years. Visit our policies page for more information about warranties. |
For surface-mounted installations: Frontrunner Entry
PVC edging (H: 14mm, W: 60mm)
Supplied in rolls of 10.1m (33’) length. One tube of cold welding paste recommended for every 10m of edging. Comes in black, dark grey, dark brown, holly green, Oxford blue, yellow. Size: 14mm x 60mm x 10.1m (9/16" x 2 1/2" x 33')
PVC edging (H: 14mm, W: 100mm)
Supplied in rolls of 10.1m (33’) length. One tube of cold welding paste recommended for every 10m of edging. Comes in black, dark grey and yellow. Size: 14mm x 100mm x 10.1m (9/16" x 3 3/4" x 33')
Aluminium edging (H: 14mm)
Supplied in sections of 2m (6'6") length with fixing screws and plugs. Comes in anodised aluminium and powder coated yellow. Size: 14mm x 45mm x 2m (9/16" x 1 13 /16" x 6'6")
Connector clips: side-to-side (H: 14mm)
For joining sections of matting together side-to-side. Supplied in packs of 10
PVC snap track (H: 14mm)
Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas. We recommend one tube of cold welding paste for every 10m of edging. Comes in black and dark grey. Size: 14mm x 2.5m (9/16" x 8'2")
For recessed installations: Frontrunner Entry
R frame (H: 14mm)
You'll need these to secure the matting on the left-to-right edges. Supplied in sections of 3m (10') length with fixing screws and plugs. Comes in anodised aluminium, powder coated dark grey and black. Size: 14mm x 12mm (9/16" x 15/32")
H section (H: 14mm)
If the front-to-back dimension of the mat well is greater than the final width of your matting, you may need a H section to secure the different sections together. Supplied in sections of 12' (3.6m) length, with fixing screws and plugs. Comes in black, with mat insert colour specified. Size: 9/16" x 1/2" (14mm x 13mm)
J frame (H: 18mm)
Installing Frontrunner against a wall? You'll need a J frame to secure the matting on the left-to-right edges. Supplied in sections of 3m (10') length. Comes in dark grey and black. Size: 18mm x 60mm (11/16" x 2 3/8")
T frame (H: 14mm)
You can use a T frame (27mm) to divide the matting into sections left-to-right – this makes it easier to lift and clean. Supplied in sections of 3m (10') length with fixing screws and plugs. Comes in anodised aluminium, powder coated dark grey and black
TL frame (H: 14mm)
You can use a T/L frame (55mm) to divide the matting into sections left-to-right – this makes it easier to lift and clean. Supplied in sections of 3m (10') length with fixing screws and plugs. Comes in anodised aluminium
L frame (H: 15mm)
Installing around a circular door or non rectangular space? You'll need a L frame to secure the matting. Size: 15mm x 2.7m length (5/8" x 8')
U section (H: 14mm)
If the front-to-back dimension of the mat well is greater than the final width of your matting, you may need a U section to secure the different sections together. Supplied in sections of 3m (10') length, with fixing screws and plugs. Comes in anodised aluminium, powder coated dark grey and black. Size: 14mm x 19mm (9/16" x 3/4")
For surface-mounted installations: Frontrunner Entry Low Profile
PVC edging (H: 10mm, W: 50mm)
Supplied in rolls of 10.1m (33’) length. One tube of cold welding paste recommended for every 10m of edging. Comes in black and dark grey. Size: 10mm x 50mm x 10.1m (3/8" x 2" x 33')
Connector clips: side-to-side (H: 10mm)
For joining sections of low profile matting together side-to-side. Supplied in packs of 10
PVC snap track (H: 10.5mm)
Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas. We recommend one tube of cold welding paste for every 10m of edging. Comes in dark grey. Size: 10.5mm x 2.5m (13/32" x 8'2")
For recessed installations: Frontrunner Entry Low Profile
R frame (H: 10mm)
You'll need these to secure the matting on the left-to-right edges. Supplied in sections of 3m (10') length with fixing screws and plugs. Comes in anodised aluminium, powder coated dark grey and black. Size: 10mm x 12mm (3/8" x 15/32")
U section (H: 10mm)
If the front-to-back dimension of the mat well is greater than the final width of your matting, you may need a U section to secure the different sections together. Supplied in sections of 3m (10') length, with fixing screws and plugs. Comes in anodised aluminium, powder coated dark grey and black. Size: 10mm x 18mm (3/8" x 11/16")
Z frame (H: 10mm)
Installing matting next to ceramic tiles? You'll need a Z frame to secure the matting. Supplied in sections of 3.6m (12') length with fixing screws and plugs. Comes in anodised aluminium. Size: 10mm x 24mm (3/8" x 15/16")
H section (H: 10mm)
If the front-to-back dimension of the mat well is greater than the final width of your matting, you may need a H section to secure the different sections together. Supplied in sections of 12' (3.6m) length, with fixing screws and plugs. Comes in black, with mat insert colour specified. Size: 3/8" x 1/2" (10mm x 13mm).
Frontrunner Entry's one-piece construction means installation is simple
- Integrates seamlessly with all internal floor coverings
- Fits with different well depths
- Contours to the floor
- Cut to fit on site – no special tools or previous site visits needed
Watch the videos below for step-by-step installation guides, or download the recessed entrance matting installation instructions and the surface-mounted installation instructions.
Keeping Frontrunner Entry looking good is easy
- Simply roll or lift to clean
- No special tools needed
- Easy to clean using a vacuum, plus a coarse brush for clearing the debris in the grid
Watch our step-by-step guide to daily, weekly and monthly cleaning below, or download the instructions.
Download our BIM objects in both Revit and IFC file types
Features
Diamond cut pattern
Two layer, open-grid construction
Close mesh grid
Made from flexible PVC
Comes in 10m (33') rolls or modules
Benefits
Certified slip resistant (DIN 51130: R11, ASTM 1677: 0.6/0.6)
Excellent drainage (DIN 51130: V10)
Wheel and heel proof
Easy to cut on site, contours to uneven surfaces
Seamless installation
| Frontrunner Entry | Low Profile | |
| Height | 14mm (9/16") | 10.5mm (13/32") |
| Standard roll options | 10 x 0.6m (33' x 2’) | 10 x 0.6m (33' x 2') |
| 10 x 0.91m (33' x 3’) | 10 x 0.91m (33' x 3') | |
| 5 x 1.2m (16'6" x 4’) | 5 x 1.2m (16'6" x 4') | |
| Standard module options | 0.8 x 1.2m (2'7" x 4’) | |
| 1 x 1.5m (3'3" x 4’11") | ||
| 1.1 x 2m (3'7" x 6’7") | ||
| Weight | 10.5 kg/m2 (2 lbs/sq.ft) | 8.7 kg/m2 (1.6 lbs/sq.ft) |
Surface modules are supplied with factory fitted PVC ramped edging to four sides
| Acoustic | Excellent sound absorption. |
| Chemical | Resistant to most acids, alkalines and oils. You can read more about specific chemical resistances by downloading this information sheet. |
| Composition | Flexible Polyvinyl Chloride (PVC) |
| Environment | Frontrunner Entry is 100% recyclable. We don’t use any substances included in the SVHC list under REACH in any of our matting products. |
| Fire | EN ISO 13501-1:2007-Bfl-S1, ASTM E648, Class 1 |
| Reversion | Thermoplastic shrinkage can result in size reductions up to 2%. This may be accelerated in hot environments. You can read more about the causes of shrinkage by downloading this information sheet. |
| Slip resistance | DIN 51130: R11, V10 ASTM E303 Dry/Wet with lines along–lines across 77-97 / 58-71 |
| Thermal | Designed to function at temperatures from -23°C and up to +60°C. Slight size variation may occur at temperature extremes. |
| UV light | Resistant to PVC degradation. |
| Warranty | Four years. Visit our policies page for more information about warranties. |
For surface-mounted installations: Frontrunner Entry
PVC edging (H: 14mm, W: 60mm)
Supplied in rolls of 10.1m (33’) length. One tube of cold welding paste recommended for every 10m of edging. Comes in black, dark grey, dark brown, holly green, Oxford blue, yellow. Size: 14mm x 60mm x 10.1m (9/16" x 2 1/2" x 33')
PVC edging (H: 14mm, W: 100mm)
Supplied in rolls of 10.1m (33’) length. One tube of cold welding paste recommended for every 10m of edging. Comes in black, dark grey and yellow. Size: 14mm x 100mm x 10.1m (9/16" x 3 3/4" x 33')
Aluminium edging (H: 14mm)
Supplied in sections of 2m (6'6") length with fixing screws and plugs. Comes in anodised aluminium and powder coated yellow. Size: 14mm x 45mm x 2m (9/16" x 1 13 /16" x 6'6")
Connector clips: side-to-side (H: 14mm)
For joining sections of matting together side-to-side. Supplied in packs of 10
PVC snap track (H: 14mm)
Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas. We recommend one tube of cold welding paste for every 10m of edging. Comes in black and dark grey. Size: 14mm x 2.5m (9/16" x 8'2")
For recessed installations: Frontrunner Entry
R frame (H: 14mm)
You'll need these to secure the matting on the left-to-right edges. Supplied in sections of 3m (10') length with fixing screws and plugs. Comes in anodised aluminium, powder coated dark grey and black. Size: 14mm x 12mm (9/16" x 15/32")
H section (H: 14mm)
If the front-to-back dimension of the mat well is greater than the final width of your matting, you may need a H section to secure the different sections together. Supplied in sections of 12' (3.6m) length, with fixing screws and plugs. Comes in black, with mat insert colour specified. Size: 9/16" x 1/2" (14mm x 13mm)
J frame (H: 18mm)
Installing Frontrunner against a wall? You'll need a J frame to secure the matting on the left-to-right edges. Supplied in sections of 3m (10') length. Comes in dark grey and black. Size: 18mm x 60mm (11/16" x 2 3/8")
T frame (H: 14mm)
You can use a T frame (27mm) to divide the matting into sections left-to-right – this makes it easier to lift and clean. Supplied in sections of 3m (10') length with fixing screws and plugs. Comes in anodised aluminium, powder coated dark grey and black
TL frame (H: 14mm)
You can use a T/L frame (55mm) to divide the matting into sections left-to-right – this makes it easier to lift and clean. Supplied in sections of 3m (10') length with fixing screws and plugs. Comes in anodised aluminium
L frame (H: 15mm)
Installing around a circular door or non rectangular space? You'll need a L frame to secure the matting. Size: 15mm x 2.7m length (5/8" x 8')
U section (H: 14mm)
If the front-to-back dimension of the mat well is greater than the final width of your matting, you may need a U section to secure the different sections together. Supplied in sections of 3m (10') length, with fixing screws and plugs. Comes in anodised aluminium, powder coated dark grey and black. Size: 14mm x 19mm (9/16" x 3/4")
For surface-mounted installations: Frontrunner Entry Low Profile
PVC edging (H: 10mm, W: 50mm)
Supplied in rolls of 10.1m (33’) length. One tube of cold welding paste recommended for every 10m of edging. Comes in black and dark grey. Size: 10mm x 50mm x 10.1m (3/8" x 2" x 33')
Connector clips: side-to-side (H: 10mm)
For joining sections of low profile matting together side-to-side. Supplied in packs of 10
PVC snap track (H: 10.5mm)
Two-part snap track that can be welded together to join rolls end-to-end or side-to-side to cover large areas. We recommend one tube of cold welding paste for every 10m of edging. Comes in dark grey. Size: 10.5mm x 2.5m (13/32" x 8'2")
For recessed installations: Frontrunner Entry Low Profile
R frame (H: 10mm)
You'll need these to secure the matting on the left-to-right edges. Supplied in sections of 3m (10') length with fixing screws and plugs. Comes in anodised aluminium, powder coated dark grey and black. Size: 10mm x 12mm (3/8" x 15/32")
U section (H: 10mm)
If the front-to-back dimension of the mat well is greater than the final width of your matting, you may need a U section to secure the different sections together. Supplied in sections of 3m (10') length, with fixing screws and plugs. Comes in anodised aluminium, powder coated dark grey and black. Size: 10mm x 18mm (3/8" x 11/16")
Z frame (H: 10mm)
Installing matting next to ceramic tiles? You'll need a Z frame to secure the matting. Supplied in sections of 3.6m (12') length with fixing screws and plugs. Comes in anodised aluminium. Size: 10mm x 24mm (3/8" x 15/16")
H section (H: 10mm)
If the front-to-back dimension of the mat well is greater than the final width of your matting, you may need a H section to secure the different sections together. Supplied in sections of 12' (3.6m) length, with fixing screws and plugs. Comes in black, with mat insert colour specified. Size: 3/8" x 1/2" (10mm x 13mm).
Frontrunner Entry's one-piece construction means installation is simple
- Integrates seamlessly with all internal floor coverings
- Fits with different well depths
- Contours to the floor
- Cut to fit on site – no special tools or previous site visits needed
Watch the videos below for step-by-step installation guides, or download the recessed entrance matting installation instructions and the surface-mounted installation instructions.
Keeping Frontrunner Entry looking good is easy
- Simply roll or lift to clean
- No special tools needed
- Easy to clean using a vacuum, plus a coarse brush for clearing the debris in the grid
Watch our step-by-step guide to daily, weekly and monthly cleaning below, or download the instructions.
Download our BIM objects in both Revit and IFC file types
Seen
something
you
like?
SIMILAR
PRODUCTS
YOU
MAY
LIKE
